Good Kernel Log Example

This is an example of the Kernel Log from a fully working S5 unit.

*This is provided as a reference for the self-trouble-shooting customers

 

 

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 130816
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 129792 pages, LIFO batch:31
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b36000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 1048576 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 511MB = 511MB total
[ 0.000000] Memory: 495548k/495548k available, 28740k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000357] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015409] pid_max: default: 32768 minimum: 301
[ 0.015648] Security Framework initialized
[ 0.015742] Mount-cache hash table entries: 512
[ 0.025652] Initializing cgroup subsys cpuacct
[ 0.025685] Initializing cgroup subsys memory
[ 0.025747] Initializing cgroup subsys blkio
[ 0.025891] CPU: Testing write buffer coherency: ok
[ 0.026437] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.026513] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.027906] Brought up 1 CPUs
[ 0.027932] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.029220] devtmpfs: initialized
[ 0.093757] pinctrl core: initialized pinctrl subsystem
[ 0.093973] rstctl core: initialized rstctl subsystem
[ 0.094469] regulator-dummy: no parameters
[ 0.094985] NET: Registered protocol family 16
[ 0.095754] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.105543] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.106320] platform 49000000.edma: alias fck already exists
[ 0.106353] platform 49000000.edma: alias fck already exists
[ 0.106382] platform 49000000.edma: alias fck already exists
[ 0.107591] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.107774] OMAP GPIO hardware version 0.1
[ 0.109112] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.110432] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.111894] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.112428] of_get_named_gpio_flags exited with status 52
[ 0.112457] gpio-rctrl rstctl.3: loaded OK
[ 0.117274] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.120535] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122759] cpsw.0: No hwaddr in dt. Using d0:5f:b8:ce:8f:ef from efuse
[ 0.122792] cpsw.1: No hwaddr in dt. Using d0:5f:b8:ce:8f:f1 from efuse
[ 0.138313] bio: create slab <bio-0> at 0
[ 0.150497] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150732] of_get_named_gpio_flags: can't parse gpios property
[ 0.150946] vmmcsd_fixed: 3300 mV
[ 0.153997] SCSI subsystem initialized
[ 0.154482] usbcore: registered new interface driver usbfs
[ 0.154616] usbcore: registered new interface driver hub
[ 0.154894] usbcore: registered new device driver usb
[ 0.156968] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 0.158477] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0
[ 0.160713] DCDC1: at 1500 mV
[ 0.161859] vdd_mpu: 925 <--> 1325 mV at 1100 mV
[ 0.163055] vdd_core: 925 <--> 1150 mV at 1100 mV
[ 0.164203] LDO1: at 1800 mV
[ 0.165281] LDO2: at 3300 mV
[ 0.167252] LDO3: 1800 mV
[ 0.168405] LDO4: at 3300 mV
[ 0.169393] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 0.170162] omap_i2c 44e0b000.i2c: unable to select pin group
[ 0.170875] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
[ 0.173220] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.173463] media: Linux media interface: v0.10
[ 0.173567] Linux video capture interface: v2.00
[ 0.173774] pps_core: LinuxPPS API ver. 1 registered
[ 0.173791] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.174518] Advanced Linux Sound Architecture Driver Initialized.
[ 0.175741] Switching to clocksource gp_timer
[ 0.194003] NET: Registered protocol family 2
[ 0.195012] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.195156] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
[ 0.195318] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.195478] TCP: reno registered
[ 0.195508] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195554] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.195972] NET: Registered protocol family 1
[ 0.196537] RPC: Registered named UNIX socket transport module.
[ 0.196557] RPC: Registered udp transport module.
[ 0.196572] RPC: Registered tcp transport module.
[ 0.196585] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.196958] Trying to unpack rootfs image as initramfs...
[ 2.121926] Freeing initrd memory: 14740K
[ 2.122604] CPU PMU: probing PMU on CPU 0
[ 2.122638] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 2.123261] omap2_mbox_probe: platform not supported
[ 2.127147] VFS: Disk quotas dquot_6.5.2
[ 2.127385] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.128665] NFS: Registering the id_resolver key type
[ 2.128771] Key type id_resolver registered
[ 2.128787] Key type id_legacy registered
[ 2.128852] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 2.129384] msgmni has been set to 996
[ 2.132164] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.132189] io scheduler noop registered
[ 2.132205] io scheduler deadline registered
[ 2.132256] io scheduler cfq registered (default)
[ 2.134058] tps65217-bl tps65217-bl: no platform data provided
[ 2.134099] tps65217-bl: probe of tps65217-bl failed with error -22
[ 2.135070] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.137699] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 2.137998] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.855355] console [ttyO0] enabled
[ 2.860222] [drm] Initialized drm 1.1.0 20060810
[ 2.878868] brd: module loaded
[ 2.889155] loop: module loaded
[ 2.892641] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.899919] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.907191] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.914460] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.921732] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 2.961018] bone-capemgr bone_capemgr.8: bone: scan failed (1 time)
[ 3.500079] bone-capemgr bone_capemgr.8: bone: scan failed (2 time)
[ 4.039137] bone-capemgr bone_capemgr.8: bone: scan failed (3 time)
[ 4.578198] bone-capemgr bone_capemgr.8: bone: scan failed (4 time)
[ 5.117262] bone-capemgr bone_capemgr.8: bone: scan failed (5 time)
[ 5.656323] bone-capemgr bone_capemgr.8: bone: scan failed (6 time)
[ 6.195390] bone-capemgr bone_capemgr.8: bone: scan failed (7 time)
[ 6.734450] bone-capemgr bone_capemgr.8: bone: scan failed (8 time)
[ 7.273510] bone-capemgr bone_capemgr.8: bone: scan failed (9 time)
[ 7.812573] bone-capemgr bone_capemgr.8: bone: scan failed (10 time)
[ 8.320556] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom
[ 8.327623] bone-capemgr: probe of bone_capemgr.8 failed with error -110
[ 8.337169] nand_get_flash_type: 2c,da against 2c,da
[ 8.342699] ONFI param page 0 valid
[ 8.346377] ONFI flash detected
[ 8.349702] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[ 8.361632] omap2-nand: detected x8 NAND flash
[ 8.366303] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 8.371915] omap2-nand: using custom ecc layout
[ 8.376758] 10 ofpart partitions found on MTD device omap2-nand.0
[ 8.383149] Creating 10 MTD partitions on "omap2-nand.0":
[ 8.388821] 0x000000000000-0x000000020000 : "spl"
[ 8.395700] 0x000000020000-0x000000040000 : "spl_backup1"
[ 8.403144] 0x000000040000-0x000000060000 : "spl_backup2"
[ 8.410561] 0x000000060000-0x000000080000 : "spl_backup3"
[ 8.417827] 0x000000080000-0x000000240000 : "u-boot"
[ 8.426104] 0x000000240000-0x000000260000 : "bootenv"
[ 8.433045] 0x000000260000-0x000000280000 : "fdt"
[ 8.439665] 0x000000280000-0x000000780000 : "kernel"
[ 8.450665] 0x000000800000-0x000001c00000 : "root"
[ 8.474069] 0x000001c00000-0x000003000000 : "config"
[ 8.497843] OneNAND driver initializing
[ 8.505352] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
[ 8.512642] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
[ 8.522898] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
[ 8.530185] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
[ 8.539426] usbcore: registered new interface driver asix
[ 8.545265] usbcore: registered new interface driver cdc_ether
[ 8.551547] usbcore: registered new interface driver smsc95xx
[ 8.557673] usbcore: registered new interface driver net1080
[ 8.563694] usbcore: registered new interface driver cdc_subset
[ 8.570005] usbcore: registered new interface driver zaurus
[ 8.575989] usbcore: registered new interface driver cdc_ncm
[ 8.582734] usbcore: registered new interface driver cdc_acm
[ 8.588693] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.597073] Initializing USB Mass Storage driver...
[ 8.602297] usbcore: registered new interface driver usb-storage
[ 8.608597] USB Mass Storage support registered.
[ 8.613628] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 8.620291] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 8.625532] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.634297] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.634318] musb-hdrc: MHDRC RTL version 2.0
[ 8.634333] musb-hdrc: setup fifo_mode 4
[ 8.634362] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.634513] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 8.639560] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 8.645507] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 8.650753] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 8.659518] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 8.659538] musb-hdrc: MHDRC RTL version 2.0
[ 8.659553] musb-hdrc: setup fifo_mode 4
[ 8.659575] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 8.659694] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 8.664734] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 8.670042] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 8.676448] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 8.684686] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 8.684799] usb usb1: default language 0x0409
[ 8.684858] usb usb1: udev 1, busnum 1, minor = 0
[ 8.684882] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 8.692011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 8.699583] usb usb1: Product: MUSB HDRC host driver
[ 8.704796] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 8.710462] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 8.716345] usb usb1: usb_probe_device
[ 8.716372] usb usb1: configuration #1 chosen from 1 choice
[ 8.716438] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 8.716649] hub 1-0:1.0: usb_probe_interface
[ 8.716671] hub 1-0:1.0: usb_probe_interface - got id
[ 8.716698] hub 1-0:1.0: USB hub found
[ 8.720791] hub 1-0:1.0: 1 port detected
[ 8.724931] hub 1-0:1.0: standalone hub
[ 8.724951] hub 1-0:1.0: individual port power switching
[ 8.724970] hub 1-0:1.0: no over-current protection
[ 8.724987] hub 1-0:1.0: Single TT
[ 8.725008] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 8.725028] hub 1-0:1.0: power on to power good time: 10ms
[ 8.725072] hub 1-0:1.0: local power source is good
[ 8.725178] hub 1-0:1.0: enabling power on all ports
[ 8.726226] mousedev: PS/2 mouse device common for all mice
[ 8.734592] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 8.742375] i2c /dev entries driver
[ 8.747765] pps_ldisc: PPS line discipline registered
[ 8.753240] Driver for 1-wire Dallas network protocol.
[ 8.760472] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 8.768030] cpuidle: using governor ladder
[ 8.772354] cpuidle: using governor menu
[ 8.776891] of_get_named_gpio_flags exited with status 6
[ 8.776911] of_get_named_gpio_flags: can't parse gpios property
[ 8.776927] of_get_named_gpio_flags: can't parse gpios property
[ 8.776963] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 8.784200] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 8.790983] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 8.798191] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 8.805547] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 8.812472] omap_hsmmc mmc.4: pins are not configured from the driver
[ 8.826376] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 8.846308] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7
[ 8.858000] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22
[ 8.865306] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
[ 8.874286] leds-gpio gpio-leds.7: pins are not configured from the driver
[ 8.881550] of_get_named_gpio_flags exited with status 53
[ 8.881573] of_get_named_gpio_flags exited with status 54
[ 8.881595] of_get_named_gpio_flags exited with status 55
[ 8.881615] of_get_named_gpio_flags exited with status 56
[ 8.881680] of_get_named_gpio_flags exited with status 53
[ 8.881973] of_get_named_gpio_flags exited with status 54
[ 8.882190] of_get_named_gpio_flags exited with status 55
[ 8.882380] of_get_named_gpio_flags exited with status 56
[ 8.882981] ledtrig-cpu: registered to indicate activity on CPUs
[ 8.889692] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 8.896884] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 8.904998] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 8.911279] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 8.918473] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 8.930950] usbcore: registered new interface driver usbhid
[ 8.936861] usbhid: USB HID core driver
[ 8.943800] TCP: cubic registered
[ 8.947314] Initializing XFRM netlink socket
[ 8.951875] NET: Registered protocol family 17
[ 8.956693] NET: Registered protocol family 15
[ 8.961534] Key type dns_resolver registered
[ 8.966175] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 8.974291] ThumbEE CPU extension supported.
[ 8.978896] Registering SWP/SWPB emulation handler
[ 8.984894] registered taskstats version 1
[ 9.041113] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 9.047527] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 9.061954] libphy: 4a101000.mdio: probed
[ 9.066261] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 9.076131] Detected MACID = d0:5f:b8:ce:8f:ef
[ 9.080810] cpsw 4a100000.ethernet: NAPI disabled
[ 9.087469] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 9.103828] ALSA device list:
[ 9.106969] No soundcards found.
[ 9.111162] Freeing init memory: 264K
[ 9.115079] Failed to execute /init
[ 9.410536] compile Jan 7 2015--11:04:44
[ 9.414785] CM_PER_SPI1_CLKCTRL 0x10002
[ 9.418815] spi_vaddr 0xfa1a0000
[ 9.422193] version 0x40300a0b
[ 9.425385] OMAP2_MCSPI_SYSSTATUS 0x1
[ 9.429218] OMAP2_MCSPI_MODULCTRL 0x1
[ 9.433053] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 9.443441] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 9.457191] hash ok
[ 9.459415] hashtest OK
[ 9.468886] bitmain-asic: success to register device
[ 9.485043] Detect hardware version = 4
[ 9.489153] fix hardware version
[ 9.492539] hardware_version = 0x4
[ 9.500137] S5 ctrl board test V1.1
[ 9.504465] pwm_percent{20}
[ 9.507607] bitmain_asic_open ok
[ 10.966854] pwm_percent{20}
[ 10.969801] timeout {0x1b57}
[ 10.972817] rev timeout {0x571b0080}
[ 10.976622] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[ 10.984799] send BC data:
[ 10.984799] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17
[ 10.994184] send BC data:
[ 10.994184] 0x0000: 0x03 0x01 0x00 0x00 0x86 0x10 0x1a 0x17
[ 11.121145] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 11.129603] send BC data:
[ 11.129603] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.140671] send BC data:
[ 11.140671] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 11.267625] bitmain_asic_close
[ 11.771828] jffs2: notice: (146) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 12.545260] net eth0: initializing cpsw version 1.12 (0)
[ 12.552955] net eth0: phy found : id is : 0x7c0f1
[ 12.557892] libphy: PHY 4a101000.mdio:01 not found
[ 12.562924] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 15.629484] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
[ 35.785573] bitmain-asic: success to unregister device
[ 36.807286] compile Jan 7 2015--11:04:44
[ 36.811571] CM_PER_SPI1_CLKCTRL 0x2
[ 36.815246] spi_vaddr 0xfa1a0000
[ 36.818629] version 0x40300a0b
[ 36.821828] OMAP2_MCSPI_SYSSTATUS 0x1
[ 36.825662] OMAP2_MCSPI_MODULCTRL 0x1
[ 36.829496] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 36.833834] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 36.840960] hash ok
[ 36.843178] hashtest OK
[ 36.845970] bitmain-asic: success to register device
[ 36.972470] Detect hardware version = 4
[ 36.976576] fix hardware version
[ 36.979959] hardware_version = 0x4
[ 36.986701] S5 ctrl board test V1.1
[ 36.996304] pwm_percent{20}
[ 37.004285] bitmain_asic_open ok
[ 37.022448] Detect device
[ 37.025894] reset hash asic
[ 37.030123] clear FPGA nonce buffer
[ 38.033333] reset hash asic
[ 38.036290] clear FPGA nonce buffer
[ 39.138740] clear FPGA nonce buffer
[ 39.142557] get chain0 reg0x0
[ 39.145670] send BC data:
[ 39.145670] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 39.252072] asic cmd return ff908213
[ 39.255816] asic cmd return ff908213
[ 39.259554] asic cmd return ff908213
[ 39.263292] asic cmd return ff908213
[ 39.267040] asic cmd return ff908213
[ 39.270861] asic cmd return ff908213
[ 39.274609] asic cmd return ff908213
[ 39.278356] asic cmd return ff908213
[ 39.282093] asic cmd return ff908213
[ 39.285835] asic cmd return ff908213
[ 39.289643] asic cmd return ff908213
[ 39.293385] asic cmd return ff908213
[ 39.297131] asic cmd return ff908213
[ 39.300873] asic cmd return ff908213
[ 39.304610] asic cmd return ff908213
[ 39.308429] asic cmd return ff908213
[ 39.312179] asic cmd return ff908213
[ 39.315921] asic cmd return ff908213
[ 39.319664] asic cmd return ff908213
[ 39.323404] asic cmd return ff908213
[ 39.327220] asic cmd return ff908213
[ 39.330970] asic cmd return ff908213
[ 39.334709] asic cmd return ff908213
[ 39.338457] asic cmd return ff908213
[ 39.342199] asic cmd return ff908213
[ 39.346010] asic cmd return ff908213
[ 39.349753] asic cmd return ff908213
[ 39.353494] asic cmd return ff908213
[ 39.357234] asic cmd return ff908213
[ 39.360971] asic cmd return ff908213
[ 39.364788] chain0 total asic:30
[ 39.368174] pos0--addr:ff
[ 39.370917] pos1--addr:ff
[ 39.373659] pos2--addr:ff
[ 39.376402] pos3--addr:ff
[ 39.379148] pos4--addr:ff
[ 39.381893] pos5--addr:ff
[ 39.384642] pos6--addr:ff
[ 39.387389] pos7--addr:ff
[ 39.390139] pos8--addr:ff
[ 39.392884] pos9--addr:ff
[ 39.395630] pos10--addr:ff
[ 39.398465] pos11--addr:ff
[ 39.401294] pos12--addr:ff
[ 39.404127] pos13--addr:ff
[ 39.406960] pos14--addr:ff
[ 39.409793] pos15--addr:ff
[ 39.412633] pos16--addr:ff
[ 39.415459] pos17--addr:ff
[ 39.418293] pos18--addr:ff
[ 39.421129] pos19--addr:ff
[ 39.423962] pos20--addr:ff
[ 39.426795] pos21--addr:ff
[ 39.429628] pos22--addr:ff
[ 39.432459] pos23--addr:ff
[ 39.435294] pos24--addr:ff
[ 39.438130] pos25--addr:ff
[ 39.440965] pos26--addr:ff
[ 39.443797] pos27--addr:ff
[ 39.446631] pos28--addr:ff
[ 39.449471] pos29--addr:ff
[ 39.452305] chain0_asic_exist{0x3fffffff}
[ 39.456500] clear FPGA nonce buffer
[ 39.460286] get chain1 reg0x0
[ 39.463394] send BC data:
[ 39.463394] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 39.570438] asic cmd return ff908213
[ 39.574197] asic cmd return ff908213
[ 39.577939] asic cmd return ff908213
[ 39.581683] asic cmd return ff908213
[ 39.585426] asic cmd return ff908213
[ 39.589230] asic cmd return ff908213
[ 39.592979] asic cmd return ff908213
[ 39.596715] asic cmd return ff908213
[ 39.600456] asic cmd return ff908213
[ 39.604195] asic cmd return ff908213
[ 39.608010] asic cmd return ff908213
[ 39.611753] asic cmd return ff908213
[ 39.615499] asic cmd return ff908213
[ 39.619241] asic cmd return ff908213
[ 39.622984] asic cmd return ff908213
[ 39.626796] asic cmd return ff908213
[ 39.630545] asic cmd return ff908213
[ 39.634307] asic cmd return ff908213
[ 39.638051] asic cmd return ff908213
[ 39.641794] asic cmd return ff908213
[ 39.645695] asic cmd return ff908213
[ 39.649449] asic cmd return ff908213
[ 39.653190] asic cmd return ff908213
[ 39.656930] asic cmd return ff908213
[ 39.660671] asic cmd return ff908213
[ 39.664477] asic cmd return ff908213
[ 39.668218] asic cmd return ff908213
[ 39.671962] asic cmd return ff908213
[ 39.675703] asic cmd return ff908213
[ 39.679442] asic cmd return ff908213
[ 39.683258] chain1 total asic:30
[ 39.686648] pos0--addr:ff
[ 39.689390] pos1--addr:ff
[ 39.692136] pos2--addr:ff
[ 39.694879] pos3--addr:ff
[ 39.697619] pos4--addr:ff
[ 39.700364] pos5--addr:ff
[ 39.703107] pos6--addr:ff
[ 39.705853] pos7--addr:ff
[ 39.708597] pos8--addr:ff
[ 39.711343] pos9--addr:ff
[ 39.714092] pos10--addr:ff
[ 39.716930] pos11--addr:ff
[ 39.719761] pos12--addr:ff
[ 39.722600] pos13--addr:ff
[ 39.725434] pos14--addr:ff
[ 39.728278] pos15--addr:ff
[ 39.731111] pos16--addr:ff
[ 39.733944] pos17--addr:ff
[ 39.736779] pos18--addr:ff
[ 39.739621] pos19--addr:ff
[ 39.742452] pos20--addr:ff
[ 39.745283] pos21--addr:ff
[ 39.748124] pos22--addr:ff
[ 39.750961] pos23--addr:ff
[ 39.753795] pos24--addr:ff
[ 39.756629] pos25--addr:ff
[ 39.759461] pos26--addr:ff
[ 39.762298] pos27--addr:ff
[ 39.765135] pos28--addr:ff
[ 39.767972] pos29--addr:ff
[ 39.770799] chain1_asic_exist{0x3fffffff}
[ 39.775006] total chain_num{2}
[ 39.778210] chain0 chain_map 0
[ 39.781405] chain0 asic_num--32 actual--30
[ 39.785688] chain0 sw addr interval 8
[ 39.789515] chain1 chain_map 1
[ 39.792712] chain1 asic_num--32 actual--30
[ 39.796998] chain1 sw addr interval 8
[ 39.800824] clear FPGA nonce buffer
[ 40.108073] btm_tx_conf
[ 40.110690] fan pwm valid {160}
[ 40.113982] Set asic frequency {350}
[ 40.117729] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 40.126187] send BC data:
[ 40.126187] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 40.136761] send BC data:
[ 40.136761] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 40.263719] Set chip_addr{0x0}reg_address{0x4}value{0x820d}
[ 40.269568] timeout {0x1b57}
[ 40.272586] rev timeout {0x571b0080}
[ 40.276397] close chain0 core
[ 40.279512] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4}
[ 40.287967] send BC data:
[ 40.287967] 0x0000: 0x03 0x00 0x00 0x1a 0x82 0x0d 0x82 0x04
[ 40.296919] chain0 inactive
[ 40.299842] send BC data:
[ 40.299842] 0x0000: 0x03 0x00 0x00 0x1a 0x85 0x00 0x00 0x0f
[ 40.310592] send BC data:
[ 40.310592] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x00 0x00 0x19
[ 40.320357] send BC data:
[ 40.320357] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x08 0x00 0x1f
[ 40.330123] send BC data:
[ 40.330123] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x10 0x00 0x15
[ 40.339889] send BC data:
[ 40.339889] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x18 0x00 0x13
[ 40.349654] send BC data:
[ 40.349654] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x20 0x00 0x01
[ 40.359419] send BC data:
[ 40.359419] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x28 0x00 0x07
[ 40.369185] send BC data:
[ 40.369185] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x30 0x00 0x0d
[ 40.378952] send BC data:
[ 40.378952] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x38 0x00 0x0b
[ 40.388716] send BC data:
[ 40.388716] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x40 0x00 0x0c
[ 40.398482] send BC data:
[ 40.398482] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x48 0x00 0x0a
[ 40.408248] send BC data:
[ 40.408248] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x50 0x00 0x00
[ 40.418013] send BC data:
[ 40.418013] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x58 0x00 0x06
[ 40.427779] send BC data:
[ 40.427779] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x60 0x00 0x14
[ 40.437545] send BC data:
[ 40.437545] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x68 0x00 0x12
[ 40.447310] send BC data:
[ 40.447310] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x70 0x00 0x18
[ 40.457076] send BC data:
[ 40.457076] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x78 0x00 0x1e
[ 40.466842] send BC data:
[ 40.466842] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x80 0x00 0x16
[ 40.476607] send BC data:
[ 40.476607] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x88 0x00 0x10
[ 40.486372] send BC data:
[ 40.486372] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x90 0x00 0x1a
[ 40.496138] send BC data:
[ 40.496138] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x98 0x00 0x1c
[ 40.505904] send BC data:
[ 40.505904] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa0 0x00 0x0e
[ 40.515669] send BC data:
[ 40.515669] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa8 0x00 0x08
[ 40.525435] send BC data:
[ 40.525435] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb0 0x00 0x02
[ 40.535207] send BC data:
[ 40.535207] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb8 0x00 0x04
[ 40.544967] send BC data:
[ 40.544967] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc0 0x00 0x03
[ 40.554732] send BC data:
[ 40.554732] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc8 0x00 0x05
[ 40.564498] send BC data:
[ 40.564498] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd0 0x00 0x0f
[ 40.574263] send BC data:
[ 40.574263] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd8 0x00 0x09
[ 40.584029] send BC data:
[ 40.584029] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe0 0x00 0x1b
[ 40.593794] send BC data:
[ 40.593794] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe8 0x00 0x1d
[ 40.603560] send BC data:
[ 40.603560] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf0 0x00 0x17
[ 40.613326] send BC data:
[ 40.613326] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf8 0x00 0x11
[ 40.625068] send BC data:
[ 40.625068] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x00 0x9a 0x04
[ 40.634823] Sending open core work
[ 40.638395] Send new block cmd
[ 41.033431] close chain1 core
[ 41.036572] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4}
[ 41.045032] send BC data:
[ 41.045032] 0x0000: 0x03 0x01 0x00 0x1a 0x82 0x0d 0x82 0x04
[ 41.052783] chain1 inactive
[ 41.055712] send BC data:
[ 41.055712] 0x0000: 0x03 0x01 0x00 0x1a 0x85 0x00 0x00 0x0f
[ 41.066452] send BC data:
[ 41.066452] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x00 0x00 0x19
[ 41.076217] send BC data:
[ 41.076217] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x08 0x00 0x1f
[ 41.085982] send BC data:
[ 41.085982] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x10 0x00 0x15
[ 41.095748] send BC data:
[ 41.095748] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x18 0x00 0x13
[ 41.105514] send BC data:
[ 41.105514] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x20 0x00 0x01
[ 41.115279] send BC data:
[ 41.115279] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x28 0x00 0x07
[ 41.125038] send BC data:
[ 41.125038] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x30 0x00 0x0d
[ 41.134810] send BC data:
[ 41.134810] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x38 0x00 0x0b
[ 41.144576] send BC data:
[ 41.144576] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x40 0x00 0x0c
[ 41.154342] send BC data:
[ 41.154342] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x48 0x00 0x0a
[ 41.164107] send BC data:
[ 41.164107] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x50 0x00 0x00
[ 41.173872] send BC data:
[ 41.173872] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x58 0x00 0x06
[ 41.183638] send BC data:
[ 41.183638] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x60 0x00 0x14
[ 41.193404] send BC data:
[ 41.193404] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x68 0x00 0x12
[ 41.203173] send BC data:
[ 41.203173] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x70 0x00 0x18
[ 41.212936] send BC data:
[ 41.212936] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x78 0x00 0x1e
[ 41.222700] send BC data:
[ 41.222700] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x80 0x00 0x16
[ 41.232466] send BC data:
[ 41.232466] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x88 0x00 0x10
[ 41.242232] send BC data:
[ 41.242232] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x90 0x00 0x1a
[ 41.251998] send BC data:
[ 41.251998] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x98 0x00 0x1c
[ 41.261763] send BC data:
[ 41.261763] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xa0 0x00 0x0e
[ 41.271529] send BC data:
[ 41.271529] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xa8 0x00 0x08
[ 41.281294] send BC data:
[ 41.281294] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xb0 0x00 0x02
[ 41.291060] send BC data:
[ 41.291060] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xb8 0x00 0x04
[ 41.300825] send BC data:
[ 41.300825] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xc0 0x00 0x03
[ 41.310591] send BC data:
[ 41.310591] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xc8 0x00 0x05
[ 41.320356] send BC data:
[ 41.320356] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xd0 0x00 0x0f
[ 41.330132] send BC data:
[ 41.330132] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xd8 0x00 0x09
[ 41.339889] send BC data:
[ 41.339889] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xe0 0x00 0x1b
[ 41.349654] send BC data:
[ 41.349654] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xe8 0x00 0x1d
[ 41.359420] send BC data:
[ 41.359420] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xf0 0x00 0x17
[ 41.369185] send BC data:
[ 41.369185] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xf8 0x00 0x11
[ 41.378949] send BC data:
[ 41.378949] 0x0000: 0x03 0x01 0x00 0x1a 0x86 0x00 0x9a 0x04
[ 41.388717] Sending open core work
[ 41.392279] Send new block cmd
[ 41.787280] send BC data:
[ 41.787280] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x10 0x05 0x18
[ 41.794961] send BC data:
[ 41.794961] 0x0000: 0x03 0x01 0x00 0x1a 0x86 0x10 0x05 0x18
[ 41.802773] send BC data:
[ 41.802773] 0x0000: 0x03 0x20 0x00 0x05 0x86 0x10 0x05 0x04
[ 41.810155] timeout {0x176ff}
[ 41.813276] rev timeout {0xff760180}
[ 41.817599] open core
[ 41.819988] send BC data:
[ 41.819988] 0x0000: 0x03 0x00 0x00 0x05 0x86 0x00 0x85 0x0b
[ 41.828165] send BC data:
[ 41.828165] 0x0000: 0x03 0x01 0x00 0x05 0x86 0x00 0x85 0x0b
[ 41.842283] Timeout {3}
[ 41.844853] Snd Time Interval {64}ms
[ 41.848598] Adj Snd Time Interval {64}ms
[ 41.852704] Set bitmain configure
[ 41.856179] clear FPGA nonce buffer
[ 42.868109] get chain0 reg0x4
[ 42.871268] send BC data:
[ 42.871268] 0x0000: 0x03 0x00 0x00 0x05 0x84 0x00 0x04 0x00
[ 42.879694] Change diff to 10
[ 42.882858] diff fix to 6
[ 42.885607] Change net_diff to 36
[ 42.891148] asic cmd return 02001b80
[ 42.894919] Chain0 PLL: {0x801b0002}
[ 42.898662] asic cmd return 02001b80
[ 42.902421] Chain0 PLL: {0x801b0002}
[ 42.906162] asic cmd return 02001b80
[ 42.909904] Chain0 PLL: {0x801b0002}
[ 42.913642] asic cmd return 02001b80
[ 42.917382] Chain0 PLL: {0x801b0002}
[ 42.921120] asic cmd return 02001b80
[ 42.924858] Chain0 PLL: {0x801b0002}
[ 42.929090] asic cmd return 02001b80
[ 42.932866] Chain0 PLL: {0x801b0002}
[ 42.936617] asic cmd return 02001b80
[ 42.940355] Chain0 PLL: {0x801b0002}
[ 42.944096] asic cmd return 02001b80
[ 42.947841] Chain0 PLL: {0x801b0002}
[ 42.951581] asic cmd return 02001b80
[ 42.955327] Chain0 PLL: {0x801b0002}
[ 42.959071] asic cmd return 02001b80
[ 42.962814] Chain0 PLL: {0x801b0002}
[ 42.967814] asic cmd return 02001b80
[ 42.971606] Chain0 PLL: {0x801b0002}
[ 42.975352] asic cmd return 02001b80
[ 42.979100] Chain0 PLL: {0x801b0002}
[ 42.982838] asic cmd return 02001b80
[ 42.986579] Chain0 PLL: {0x801b0002}
[ 42.990322] asic cmd return 02001b80
[ 42.994061] Chain0 PLL: {0x801b0002}
[ 42.997801] asic cmd return 02001b80
[ 43.001545] Chain0 PLL: {0x801b0002}
[ 43.009283] asic cmd return 02001b80
[ 43.013050] Chain0 PLL: {0x801b0002}
[ 43.016792] asic cmd return 02001b80
[ 43.020531] send_to_fpga_work in queue
[ 43.024462] Chain0 PLL: {0x801b0002}
[ 43.028205] asic cmd return 02001b80
[ 43.031957] Chain0 PLL: {0x801b0002}
[ 43.035698] asic cmd return 02001b80
[ 43.039439] Chain0 PLL: {0x801b0002}
[ 43.043176] asic cmd return 02001b80
[ 43.046914] Chain0 PLL: {0x801b0002}
[ 43.058841] New blok
[ 43.062549] send_to_fpga_work in queue
[ 43.070355] send_to_fpga_work in queue
[ 43.074372] Sending open core work
[ 43.077936] Send new block cmd
[ 43.087672] asic cmd return 02001b80
[ 43.091447] Chain0 PLL: {0x801b0002}
[ 43.095191] asic cmd return 02001b80
[ 43.098931] Chain0 PLL: {0x801b0002}
[ 43.102667] asic cmd return 02001b80
[ 43.106408] Chain0 PLL: {0x801b0002}
[ 43.110145] asic cmd return 02001b80
[ 43.113883] Chain0 PLL: {0x801b0002}
[ 43.117623] asic cmd return 02001b80
[ 43.121367] Chain0 PLL: {0x801b0002}
[ 43.129262] asic cmd return 02001b80
[ 43.133020] Chain0 PLL: {0x801b0002}
[ 43.136764] send_to_fpga_work in queue
[ 43.140688] asic cmd return 02001b80
[ 43.144436] Chain0 PLL: {0x801b0002}
[ 43.148178] asic cmd return 02001b80
[ 43.151922] Chain0 PLL: {0x801b0002}
[ 43.155663] asic cmd return 02001b80
[ 43.159404] Chain0 PLL: {0x801b0002}
[ 43.163141] asic cmd return 02001b80
[ 43.166889] Chain0 PLL: {0x801b0002}
[ 43.203203] send_to_fpga_work in queue
[ 43.269837] temp_highest{32}
[ 43.272879] pwm_percent{20}
[ 43.275814] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 43.283704] g_FPGA_FIFO_SPACE 4, fifo_space{15649}
[ 43.288747] ret_nonce_num = 30, snd_to_fpga_work{68}
[ 43.293949] total ret nonce num = 0, diff1_nonce num = 0
[ 43.299509] gDiff_nonce_num{0}gNonce_Err{0}
[ 43.303992] gSubmit_nonce_num{0}
[ 43.307385] chain0 asic00 ret nonce_num{0}
[ 43.311671] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 43.317126] dev->temp_out_ctrl{1}
[ 48.019734] jiffies{-129014}, open{-132177},dev->wait_timeout{1}
[ 48.026056] timeout {0xbb7}
[ 48.029000] rev timeout {0xb70b0080}
[ 53.334753] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 53.342615] g_FPGA_FIFO_SPACE 4, fifo_space{1522}
[ 53.347542] ret_nonce_num = 56, snd_to_fpga_work{3611}
[ 53.352929] total ret nonce num = 26, diff1_nonce num = 1664
[ 53.358845] gDiff_nonce_num{0}gNonce_Err{0}
[ 53.363214] gSubmit_nonce_num{0}
[ 53.366646] chain0 asic01 ret nonce_num{0}
[ 53.370939] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 53.376401] dev->temp_out_ctrl{1}
[ 58.894799] match diff 10 hash2_32[6]{0x000e64a7}
[ 63.396801] temp_highest{36}
[ 63.399838] pwm_percent{20}
[ 63.402773] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 63.410494] g_FPGA_FIFO_SPACE 4, fifo_space{245}
[ 63.415330] ret_nonce_num = 91, snd_to_fpga_work{10190}
[ 63.420801] total ret nonce num = 61, diff1_nonce num = 3904
[ 63.426717] gDiff_nonce_num{1}gNonce_Err{0}
[ 63.431092] gSubmit_nonce_num{1}
[ 63.434476] chain0 asic02 ret nonce_num{1}
[ 63.438764] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 63.444226] dev->temp_out_ctrl{1}
[ 63.644676] match diff 10 hash2_32[6]{0x00091e77}
[ 64.644665] match diff 10 hash2_32[6]{0x003eca15}
[ 65.582176] match diff 10 hash2_32[6]{0x0012ed8e}
[ 69.508269] Send new block cmd
[ 69.615300] pwm_percent{20}
[ 69.618255] timeout {0x1b57}
[ 69.621272] rev timeout {0x571b0080}
[ 69.625080] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17}
[ 69.633290] send BC data:
[ 69.633290] 0x0000: 0x03 0x00 0x00 0x05 0x86 0x10 0x1a 0x17
[ 69.640818] send BC data:
[ 69.640818] 0x0000: 0x03 0x01 0x00 0x05 0x86 0x10 0x1a 0x17
[ 69.648309] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 69.656765] send BC data:
[ 69.656765] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 69.664154] send BC data:
[ 69.664154] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 69.671638] bitmain_asic_close
[ 74.557645] bitmain-asic: success to unregister device
[ 75.579611] compile Jan 7 2015--11:04:44
[ 75.583924] CM_PER_SPI1_CLKCTRL 0x2
[ 75.587595] spi_vaddr 0xfa1a0000
[ 75.590974] version 0x40300a0b
[ 75.594172] OMAP2_MCSPI_SYSSTATUS 0x1
[ 75.597997] OMAP2_MCSPI_MODULCTRL 0x1
[ 75.601830] OMAP2_MCSPI_CHCONF0 0x180103c5
[ 75.606176] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0}
[ 75.613325] hash ok
[ 75.615538] hashtest OK
[ 75.618327] bitmain-asic: success to register device
[ 75.694649] Detect hardware version = 4
[ 75.698749] fix hardware version
[ 75.702127] hardware_version = 0x4
[ 75.705940] S5 ctrl board test V1.1
[ 75.709679] pwm_percent{20}
[ 75.712769] bitmain_asic_open ok
[ 75.727211] Detect device
[ 75.730112] reset hash asic
[ 75.733047] clear FPGA nonce buffer
[ 76.736450] reset hash asic
[ 76.739398] clear FPGA nonce buffer
[ 77.841855] clear FPGA nonce buffer
[ 77.845686] get chain0 reg0x0
[ 77.848797] send BC data:
[ 77.848797] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11
[ 77.955192] asic cmd return ff908213
[ 77.958947] asic cmd return ff908213
[ 77.962693] asic cmd return ff908213
[ 77.966440] asic cmd return ff908213
[ 77.970180] asic cmd return ff908213
[ 77.974487] asic cmd return ff908213
[ 77.978234] asic cmd return ff908213
[ 77.981987] asic cmd return ff908213
[ 77.985727] asic cmd return ff908213
[ 77.989471] asic cmd return ff908213
[ 77.993617] asic cmd return ff908213
[ 77.997385] asic cmd return ff908213
[ 78.001133] asic cmd return ff908213
[ 78.004885] asic cmd return ff908213
[ 78.008633] asic cmd return ff908213
[ 78.012454] asic cmd return ff908213
[ 78.016204] asic cmd return ff908213
[ 78.019945] asic cmd return ff908213
[ 78.023687] asic cmd return ff908213
[ 78.027424] asic cmd return ff908213
[ 78.031245] asic cmd return ff908213
[ 78.034990] asic cmd return ff908213
[ 78.038730] asic cmd return ff908213
[ 78.042476] asic cmd return ff908213
[ 78.046218] asic cmd return ff908213
[ 78.050030] asic cmd return ff908213
[ 78.053776] asic cmd return ff908213
[ 78.057524] asic cmd return ff908213
[ 78.061267] asic cmd return ff908213
[ 78.065008] asic cmd return ff908213
[ 78.068834] chain0 total asic:30
[ 78.072219] pos0--addr:ff
[ 78.074963] pos1--addr:ff
[ 78.077713] pos2--addr:ff
[ 78.080459] pos3--addr:ff
[ 78.083206] pos4--addr:ff
[ 78.085965] pos5--addr:ff
[ 78.088705] pos6--addr:ff
[ 78.091449] pos7--addr:ff
[ 78.094189] pos8--addr:ff
[ 78.096948] pos9--addr:ff
[ 78.099695] pos10--addr:ff
[ 78.102528] pos11--addr:ff
[ 78.105361] pos12--addr:ff
[ 78.108191] pos13--addr:ff
[ 78.111022] pos14--addr:ff
[ 78.113857] pos15--addr:ff
[ 78.116690] pos16--addr:ff
[ 78.119524] pos17--addr:ff
[ 78.122349] pos18--addr:ff
[ 78.125182] pos19--addr:ff
[ 78.128011] pos20--addr:ff
[ 78.130842] pos21--addr:ff
[ 78.133676] pos22--addr:ff
[ 78.136512] pos23--addr:ff
[ 78.139339] pos24--addr:ff
[ 78.142169] pos25--addr:ff
[ 78.145005] pos26--addr:ff
[ 78.147843] pos27--addr:ff
[ 78.150681] pos28--addr:ff
[ 78.153523] pos29--addr:ff
[ 78.156359] chain0_asic_exist{0x3fffffff}
[ 78.160556] clear FPGA nonce buffer
[ 78.164599] get chain1 reg0x0
[ 78.167719] send BC data:
[ 78.167719] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11
[ 78.273547] asic cmd return ff908213
[ 78.277295] asic cmd return ff908213
[ 78.281034] asic cmd return ff908213
[ 78.284776] asic cmd return ff908213
[ 78.288519] asic cmd return ff908213
[ 78.292319] asic cmd return ff908213
[ 78.296061] asic cmd return ff908213
[ 78.299802] asic cmd return ff908213
[ 78.303623] asic cmd return ff908213
[ 78.307371] asic cmd return ff908213
[ 78.311183] asic cmd return ff908213
[ 78.314930] asic cmd return ff908213
[ 78.318671] asic cmd return ff908213
[ 78.322411] asic cmd return ff908213
[ 78.326149] asic cmd return ff908213
[ 78.329958] asic cmd return ff908213
[ 78.333695] asic cmd return ff908213
[ 78.337442] asic cmd return ff908213
[ 78.341175] asic cmd return ff908213
[ 78.344919] asic cmd return ff908213
[ 78.348719] asic cmd return ff908213
[ 78.352463] asic cmd return ff908213
[ 78.356205] asic cmd return ff908213
[ 78.359941] asic cmd return ff908213
[ 78.363681] asic cmd return ff908213
[ 78.367477] asic cmd return ff908213
[ 78.371224] asic cmd return ff908213
[ 78.374964] asic cmd return ff908213
[ 78.378709] asic cmd return ff908213
[ 78.382451] asic cmd return ff908213
[ 78.386271] chain1 total asic:30
[ 78.389654] pos0--addr:ff
[ 78.392401] pos1--addr:ff
[ 78.395146] pos2--addr:ff
[ 78.397892] pos3--addr:ff
[ 78.400635] pos4--addr:ff
[ 78.403381] pos5--addr:ff
[ 78.406124] pos6--addr:ff
[ 78.408871] pos7--addr:ff
[ 78.411615] pos8--addr:ff
[ 78.414353] pos9--addr:ff
[ 78.417097] pos10--addr:ff
[ 78.419934] pos11--addr:ff
[ 78.422770] pos12--addr:ff
[ 78.425597] pos13--addr:ff
[ 78.428433] pos14--addr:ff
[ 78.431269] pos15--addr:ff
[ 78.434100] pos16--addr:ff
[ 78.436934] pos17--addr:ff
[ 78.439768] pos18--addr:ff
[ 78.442599] pos19--addr:ff
[ 78.445432] pos20--addr:ff
[ 78.448265] pos21--addr:ff
[ 78.451098] pos22--addr:ff
[ 78.453937] pos23--addr:ff
[ 78.456772] pos24--addr:ff
[ 78.459607] pos25--addr:ff
[ 78.462442] pos26--addr:ff
[ 78.465279] pos27--addr:ff
[ 78.468115] pos28--addr:ff
[ 78.470956] pos29--addr:ff
[ 78.473791] chain1_asic_exist{0x3fffffff}
[ 78.477997] total chain_num{2}
[ 78.481198] chain0 chain_map 0
[ 78.484402] chain0 asic_num--32 actual--30
[ 78.488688] chain0 sw addr interval 8
[ 78.492524] chain1 chain_map 1
[ 78.495721] chain1 asic_num--32 actual--30
[ 78.500008] chain1 sw addr interval 8
[ 78.503846] clear FPGA nonce buffer
[ 78.810971] btm_tx_conf
[ 78.813580] fan pwm valid {160}
[ 78.816879] Set asic frequency {350}
[ 78.820629] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd}
[ 78.829089] send BC data:
[ 78.829089] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 78.839885] send BC data:
[ 78.839885] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd
[ 78.966843] Set chip_addr{0x0}reg_address{0x4}value{0x820d}
[ 78.972687] timeout {0x1b57}
[ 78.975710] rev timeout {0x571b0080}
[ 78.979556] close chain0 core
[ 78.982671] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4}
[ 78.991137] send BC data:
[ 78.991137] 0x0000: 0x03 0x00 0x00 0x1a 0x82 0x0d 0x82 0x04
[ 79.000076] chain0 inactive
[ 79.003022] send BC data:
[ 79.003022] 0x0000: 0x03 0x00 0x00 0x1a 0x85 0x00 0x00 0x0f
[ 79.013718] send BC data:
[ 79.013718] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x00 0x00 0x19
[ 79.023484] send BC data:
[ 79.023484] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x08 0x00 0x1f
[ 79.033248] send BC data:
[ 79.033248] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x10 0x00 0x15
[ 79.043014] send BC data:
[ 79.043014] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x18 0x00 0x13
[ 79.052780] send BC data:
[ 79.052780] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x20 0x00 0x01
[ 79.062545] send BC data:
[ 79.062545] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x28 0x00 0x07
[ 79.072310] send BC data:
[ 79.072310] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x30 0x00 0x0d
[ 79.082076] send BC data:
[ 79.082076] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x38 0x00 0x0b
[ 79.091841] send BC data:
[ 79.091841] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x40 0x00 0x0c
[ 79.101607] send BC data:
[ 79.101607] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x48 0x00 0x0a
[ 79.111376] send BC data:
[ 79.111376] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x50 0x00 0x00
[ 79.121138] send BC data:
[ 79.121138] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x58 0x00 0x06
[ 79.130904] send BC data:
[ 79.130904] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x60 0x00 0x14
[ 79.140669] send BC data:
[ 79.140669] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x68 0x00 0x12
[ 79.150429] send BC data:
[ 79.150429] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x70 0x00 0x18
[ 79.160201] send BC data:
[ 79.160201] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x78 0x00 0x1e
[ 79.169983] send BC data:
[ 79.169983] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x80 0x00 0x16
[ 79.179734] send BC data:
[ 79.179734] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x88 0x00 0x10
[ 79.189498] send BC data:
[ 79.189498] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x90 0x00 0x1a
[ 79.199264] send BC data:
[ 79.199264] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x98 0x00 0x1c
[ 79.209029] send BC data:
[ 79.209029] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa0 0x00 0x0e
[ 79.218798] send BC data:
[ 79.218798] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa8 0x00 0x08
[ 79.228560] send BC data:
[ 79.228560] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb0 0x00 0x02
[ 79.238326] send BC data:
[ 79.238326] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb8 0x00 0x04
[ 79.248091] send BC data:
[ 79.248091] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc0 0x00 0x03
[ 79.257857] send BC data:
[ 79.257857] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc8 0x00 0x05
[ 79.267623] send BC data:
[ 79.267623] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd0 0x00 0x0f
[ 79.277388] send BC data:
[ 79.277388] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd8 0x00 0x09
[ 79.287154] send BC data:
[ 79.287154] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe0 0x00 0x1b
[ 79.296920] send BC data:
[ 79.296920] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe8 0x00 0x1d
[ 79.306693] send BC data:
[ 79.306693] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf0 0x00 0x17
[ 79.316452] send BC data:
[ 79.316452] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf8 0x00 0x11
[ 79.326216] send BC data:
[ 79.326216] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x00 0x9a 0x04
[ 79.335984] Sending open core work
[ 79.339546] Send new block cmd
[ 79.783369] close chain1 core
[ 79.786495] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4}
[ 79.794950] send BC data:
[ 79.794950] 0x0000: 0x03 0x01 0x00 0x1a 0x82 0x0d 0x82 0x04
[ 79.802776] chain1 inactive
[ 79.805704] send BC data:
[ 79.805704] 0x0000: 0x03 0x01 0x00 0x1a 0x85 0x00 0x00 0x0f
[ 79.816451] send BC data:
[ 79.816451] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x00 0x00 0x19
[ 79.826217] send BC data:
[ 79.826217] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x08 0x00 0x1f
[ 79.835982] send BC data:
[ 79.835982] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x10 0x00 0x15
[ 79.845748] send BC data:
[ 79.845748] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x18 0x00 0x13
[ 79.855513] send BC data:
[ 79.855513] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x20 0x00 0x01
[ 79.865279] send BC data:
[ 79.865279] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x28 0x00 0x07
[ 79.875044] send BC data:
[ 79.875044] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x30 0x00 0x0d
[ 79.884810] send BC data:
[ 79.884810] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x38 0x00 0x0b
[ 79.894575] send BC data:
[ 79.894575] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x40 0x00 0x0c
[ 79.904342] send BC data:
[ 79.904342] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x48 0x00 0x0a
[ 79.914107] send BC data:
[ 79.914107] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x50 0x00 0x00
[ 79.923873] send BC data:
[ 79.923873] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x58 0x00 0x06
[ 79.933638] send BC data:
[ 79.933638] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x60 0x00 0x14
[ 79.943404] send BC data:
[ 79.943404] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x68 0x00 0x12
[ 79.953170] send BC data:
[ 79.953170] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x70 0x00 0x18
[ 79.962935] send BC data:
[ 79.962935] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x78 0x00 0x1e
[ 79.972701] send BC data:
[ 79.972701] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x80 0x00 0x16
[ 79.982463] send BC data:
[ 79.982463] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x88 0x00 0x10
[ 79.992233] send BC data:
[ 79.992233] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x90 0x00 0x1a
[ 80.002032] send BC data:
[ 80.002032] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x98 0x00 0x1c
[ 80.011766] send BC data:
[ 80.011766] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xa0 0x00 0x0e
[ 80.021529] send BC data:
[ 80.021529] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xa8 0x00 0x08
[ 80.031296] send BC data:
[ 80.031296] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xb0 0x00 0x02
[ 80.041061] send BC data:
[ 80.041061] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xb8 0x00 0x04
[ 80.050827] send BC data:
[ 80.050827] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xc0 0x00 0x03
[ 80.060591] send BC data:
[ 80.060591] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xc8 0x00 0x05
[ 80.070357] send BC data:
[ 80.070357] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xd0 0x00 0x0f
[ 80.080123] send BC data:
[ 80.080123] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xd8 0x00 0x09
[ 80.089888] send BC data:
[ 80.089888] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xe0 0x00 0x1b
[ 80.099654] send BC data:
[ 80.099654] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xe8 0x00 0x1d
[ 80.109420] send BC data:
[ 80.109420] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xf0 0x00 0x17
[ 80.119185] send BC data:
[ 80.119185] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xf8 0x00 0x11
[ 80.128951] send BC data:
[ 80.128951] 0x0000: 0x03 0x01 0x00 0x1a 0x86 0x00 0x9a 0x04
[ 80.138718] Sending open core work
[ 80.142280] Send new block cmd
[ 80.537279] send BC data:
[ 80.537279] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x10 0x05 0x18
[ 80.544962] send BC data:
[ 80.544962] 0x0000: 0x03 0x01 0x00 0x1a 0x86 0x10 0x05 0x18
[ 80.552772] send BC data:
[ 80.552772] 0x0000: 0x03 0x20 0x00 0x05 0x86 0x10 0x05 0x04
[ 80.560151] timeout {0x176ff}
[ 80.563255] rev timeout {0xff760180}
[ 80.567073] open core
[ 80.569458] send BC data:
[ 80.569458] 0x0000: 0x03 0x00 0x00 0x05 0x86 0x00 0x85 0x0b
[ 80.578163] send BC data:
[ 80.578163] 0x0000: 0x03 0x01 0x00 0x05 0x86 0x00 0x85 0x0b
[ 80.592344] Timeout {3}
[ 80.594914] Snd Time Interval {64}ms
[ 80.598653] Adj Snd Time Interval {64}ms
[ 80.602758] Set bitmain configure
[ 80.606232] clear FPGA nonce buffer
[ 81.619918] get chain0 reg0x4
[ 81.623077] send BC data:
[ 81.623077] 0x0000: 0x03 0x00 0x00 0x05 0x84 0x00 0x04 0x00
[ 81.631467] Change diff to 10
[ 81.634641] diff fix to 6
[ 81.637387] Change net_diff to 36
[ 81.643110] asic cmd return 02001b80
[ 81.646889] Chain0 PLL: {0x801b0002}
[ 81.650652] asic cmd return 02001b80
[ 81.654399] Chain0 PLL: {0x801b0002}
[ 81.658134] asic cmd return 02001b80
[ 81.661877] Chain0 PLL: {0x801b0002}
[ 81.665616] asic cmd return 02001b80
[ 81.669353] Chain0 PLL: {0x801b0002}
[ 81.673091] asic cmd return 02001b80
[ 81.676830] Chain0 PLL: {0x801b0002}
[ 81.681302] asic cmd return 02001b80
[ 81.685061] Chain0 PLL: {0x801b0002}
[ 81.688810] asic cmd return 02001b80
[ 81.692558] Chain0 PLL: {0x801b0002}
[ 81.696307] asic cmd return 02001b80
[ 81.700056] Chain0 PLL: {0x801b0002}
[ 81.703791] asic cmd return 02001b80
[ 81.707539] Chain0 PLL: {0x801b0002}
[ 81.711428] asic cmd return 02001b80
[ 81.715294] Chain0 PLL: {0x801b0002}
[ 81.726619] asic cmd return 02001b80
[ 81.730375] Chain0 PLL: {0x801b0002}
[ 81.734109] asic cmd return 02001b80
[ 81.737846] Chain0 PLL: {0x801b0002}
[ 81.741601] asic cmd return 02001b80
[ 81.745341] Chain0 PLL: {0x801b0002}
[ 81.749078] asic cmd return 02001b80
[ 81.752817] Chain0 PLL: {0x801b0002}
[ 81.756548] asic cmd return 02001b80
[ 81.760295] Chain0 PLL: {0x801b0002}
[ 81.769578] send_to_fpga_work in queue
[ 81.779400] asic cmd return 02001b80
[ 81.783148] Chain0 PLL: {0x801b0002}
[ 81.786897] asic cmd return 02001b80
[ 81.790641] Chain0 PLL: {0x801b0002}
[ 81.794378] asic cmd return 02001b80
[ 81.798113] Chain0 PLL: {0x801b0002}
[ 81.801847] asic cmd return 02001b80
[ 81.805590] Chain0 PLL: {0x801b0002}
[ 81.809337] asic cmd return 02001b80
[ 81.813078] Chain0 PLL: {0x801b0002}
[ 81.817279] asic cmd return 02001b80
[ 81.821029] Chain0 PLL: {0x801b0002}
[ 81.824768] asic cmd return 02001b80
[ 81.828513] Chain0 PLL: {0x801b0002}
[ 81.832248] asic cmd return 02001b80
[ 81.835985] send_to_fpga_work in queue
[ 81.839927] Chain0 PLL: {0x801b0002}
[ 81.843668] asic cmd return 02001b80
[ 81.847407] Chain0 PLL: {0x801b0002}
[ 81.851148] asic cmd return 02001b80
[ 81.854884] Chain0 PLL: {0x801b0002}
[ 81.859216] asic cmd return 02001b80
[ 81.862967] Chain0 PLL: {0x801b0002}
[ 81.866717] asic cmd return 02001b80
[ 81.870463] Chain0 PLL: {0x801b0002}
[ 81.874203] asic cmd return 02001b80
[ 81.877945] Chain0 PLL: {0x801b0002}
[ 81.881689] asic cmd return 02001b80
[ 81.885434] Chain0 PLL: {0x801b0002}
[ 81.889175] asic cmd return 02001b80
[ 81.892916] Chain0 PLL: {0x801b0002}
[ 81.902384] send_to_fpga_work in queue
[ 81.968896] temp_highest{42}
[ 81.971929] pwm_percent{36}
[ 81.974862] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 81.982586] g_FPGA_FIFO_SPACE 4, fifo_space{16288}
[ 81.987602] ret_nonce_num = 30, snd_to_fpga_work{66}
[ 81.992809] total ret nonce num = 0, diff1_nonce num = 0
[ 81.998363] gDiff_nonce_num{0}gNonce_Err{0}
[ 82.002753] gSubmit_nonce_num{0}
[ 82.006135] chain0 asic00 ret nonce_num{0}
[ 82.010419] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 82.015882] dev->temp_out_ctrl{1}
[ 86.781391] jiffies{-109168}, open{-112337},dev->wait_timeout{1}
[ 86.787703] timeout {0xbb7}
[ 86.790629] rev timeout {0xb70b0080}
[ 92.033599] temp_highest{41}
[ 92.036639] pwm_percent{34}
[ 92.039571] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 92.047302] g_FPGA_FIFO_SPACE 4, fifo_space{1869}
[ 92.052220] ret_nonce_num = 47, snd_to_fpga_work{3578}
[ 92.057601] total ret nonce num = 17, diff1_nonce num = 1088
[ 92.063516] gDiff_nonce_num{0}gNonce_Err{0}
[ 92.067892] gSubmit_nonce_num{0}
[ 92.071285] chain0 asic01 ret nonce_num{1}
[ 92.075567] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 92.081035] dev->temp_out_ctrl{1}
[ 96.656397] match diff 10 hash2_32[6]{0x002527d2}
[ 98.531392] match diff 10 hash2_32[6]{0x000c31b6}
[ 98.906422] match diff 10 hash2_32[6]{0x0007b181}
[ 102.096112] temp_highest{44}
[ 102.099146] pwm_percent{42}
[ 102.102079] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 102.109819] g_FPGA_FIFO_SPACE 4, fifo_space{343}
[ 102.114651] ret_nonce_num = 97, snd_to_fpga_work{10157}
[ 102.120116] total ret nonce num = 67, diff1_nonce num = 4288
[ 102.126038] gDiff_nonce_num{3}gNonce_Err{0}
[ 102.130413] gSubmit_nonce_num{3}
[ 102.133789] chain0 asic02 ret nonce_num{2}
[ 102.138071] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 102.143537] dev->temp_out_ctrl{1}
[ 108.406381] match diff 10 hash2_32[6]{0x000a98eb}
[ 111.971021] jiffies{-96271}dev->cgminer_start_time{-111800}time_elasp_ms =30330ms dev->total_nonce_num{99}
[ 111.981160] bgNonce_average{12}
[ 111.984452] chain0 Chain_nonce_nu[57] Chain_nonce_nu_last[0]
[ 111.990369] bgNonce_average{12}
[ 111.993669] chain1 Chain_nonce_nu[42] Chain_nonce_nu_last[0]
[ 112.158551] temp_highest{46}
[ 112.161589] pwm_percent{47}
[ 112.164518] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 112.172240] g_FPGA_FIFO_SPACE 4, fifo_space{245}
[ 112.177067] ret_nonce_num = 130, snd_to_fpga_work{16736}
[ 112.182632] total ret nonce num = 100, diff1_nonce num = 6400
[ 112.188639] gDiff_nonce_num{4}gNonce_Err{0}
[ 112.193015] gSubmit_nonce_num{4}
[ 112.196400] chain0 asic03 ret nonce_num{1}
[ 112.200688] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 112.206144] dev->temp_out_ctrl{1}
[ 114.781387] match diff 10 hash2_32[6]{0x00163796}
[ 116.031386] match diff 10 hash2_32[6]{0x0030c90b}
[ 122.221101] temp_highest{48}
[ 122.224141] pwm_percent{53}
[ 122.227070] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 122.234799] g_FPGA_FIFO_SPACE 4, fifo_space{1507}
[ 122.239717] ret_nonce_num = 180, snd_to_fpga_work{23315}
[ 122.245268] total ret nonce num = 150, diff1_nonce num = 9600
[ 122.251280] gDiff_nonce_num{6}gNonce_Err{0}
[ 122.255656] gSubmit_nonce_num{6}
[ 122.259035] chain0 asic04 ret nonce_num{1}
[ 122.263317] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 122.268778] dev->temp_out_ctrl{1}
[ 127.468878] match diff 10 hash2_32[6]{0x0010c1fc}
[ 132.283571] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 132.291318] g_FPGA_FIFO_SPACE 4, fifo_space{862}
[ 132.296144] ret_nonce_num = 222, snd_to_fpga_work{29893}
[ 132.301707] total ret nonce num = 192, diff1_nonce num = 12288
[ 132.307804] gDiff_nonce_num{7}gNonce_Err{0}
[ 132.312189] gSubmit_nonce_num{7}
[ 132.315568] chain0 asic05 ret nonce_num{3}
[ 132.319858] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 132.325317] dev->temp_out_ctrl{1}
[ 132.531414] match diff 10 hash2_32[6]{0x00263abc}
[ 132.906407] match diff 10 hash2_32[6]{0x0012400b}
[ 132.968944] match diff 10 hash2_32[6]{0x001a3933}
[ 135.843906] match diff 10 hash2_32[6]{0x003204ef}
[ 136.406375] match diff 10 hash2_32[6]{0x002e36e8}
[ 138.093905] match diff 10 hash2_32[6]{0x000ebb89}
[ 139.656386] match diff 10 hash2_32[6]{0x000694cf}
[ 142.346011] temp_highest{50}
[ 142.349045] pwm_percent{58}
[ 142.351974] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 142.359710] g_FPGA_FIFO_SPACE 4, fifo_space{326}
[ 142.364542] ret_nonce_num = 271, snd_to_fpga_work{36472}
[ 142.370107] total ret nonce num = 241, diff1_nonce num = 15424
[ 142.376199] gDiff_nonce_num{14}gNonce_Err{0}
[ 142.380654] gSubmit_nonce_num{14}
[ 142.384121] chain0 asic06 ret nonce_num{6}
[ 142.388407] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 142.393859] dev->temp_out_ctrl{1}
[ 143.343898] match diff 10 hash2_32[6]{0x00115dae}
[ 145.781391] match diff 10 hash2_32[6]{0x0023069b}
[ 152.408612] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 152.416383] g_FPGA_FIFO_SPACE 4, fifo_space{972}
[ 152.421211] ret_nonce_num = 312, snd_to_fpga_work{43051}
[ 152.426784] total ret nonce num = 282, diff1_nonce num = 18048
[ 152.432876] gDiff_nonce_num{16}gNonce_Err{0}
[ 152.437338] gSubmit_nonce_num{16}
[ 152.440815] chain0 asic07 ret nonce_num{6}
[ 152.445106] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 152.450567] dev->temp_out_ctrl{1}
[ 162.471014] temp_highest{52}
[ 162.474067] pwm_percent{63}
[ 162.477004] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 162.484728] g_FPGA_FIFO_SPACE 4, fifo_space{368}
[ 162.489558] ret_nonce_num = 343, snd_to_fpga_work{49630}
[ 162.495129] total ret nonce num = 313, diff1_nonce num = 20032
[ 162.501232] gDiff_nonce_num{16}gNonce_Err{0}
[ 162.505694] gSubmit_nonce_num{16}
[ 162.509162] chain0 asic08 ret nonce_num{4}
[ 162.513452] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 162.518908] dev->temp_out_ctrl{1}
[ 165.031386] match diff 10 hash2_32[6]{0x0027d168}
[ 172.531456] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 172.539218] g_FPGA_FIFO_SPACE 42, fifo_space{862}
[ 172.544152] ret_nonce_num = 379, snd_to_fpga_work{56170}
[ 172.549701] total ret nonce num = 349, diff1_nonce num = 22336
[ 172.555794] gDiff_nonce_num{17}gNonce_Err{0}
[ 172.560259] gSubmit_nonce_num{17}
[ 172.563736] chain0 asic09 ret nonce_num{5}
[ 172.568025] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 172.573482] dev->temp_out_ctrl{1}
[ 174.656448] match diff 10 hash2_32[6]{0x002e6717}
[ 177.968895] match diff 10 hash2_32[6]{0x0008e8bb}
[ 182.533519] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 182.541276] g_FPGA_FIFO_SPACE 4, fifo_space{368}
[ 182.546107] ret_nonce_num = 422, snd_to_fpga_work{62747}
[ 182.551661] total ret nonce num = 392, diff1_nonce num = 25088
[ 182.557756] gDiff_nonce_num{19}gNonce_Err{0}
[ 182.562211] gSubmit_nonce_num{19}
[ 182.565678] chain0 asic10 ret nonce_num{6}
[ 182.569960] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 182.575421] dev->temp_out_ctrl{1}
[ 185.718880] match diff 10 hash2_32[6]{0x00038636}
[ 186.951016] Change diff to 11
[ 186.954157] diff fix to 6
[ 192.596012] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 192.603762] g_FPGA_FIFO_SPACE 4, fifo_space{409}
[ 192.608588] ret_nonce_num = 461, snd_to_fpga_work{69326}
[ 192.614155] total ret nonce num = 431, diff1_nonce num = 27584
[ 192.620243] gDiff_nonce_num{20}gNonce_Err{0}
[ 192.624706] gSubmit_nonce_num{20}
[ 192.628174] chain0 asic11 ret nonce_num{13}
[ 192.632569] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 192.638036] dev->temp_out_ctrl{1}
[ 192.843918] match diff 11 hash2_32[6]{0x000d81ec}
[ 202.658615] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 202.666377] g_FPGA_FIFO_SPACE 4, fifo_space{574}
[ 202.671213] ret_nonce_num = 495, snd_to_fpga_work{75905}
[ 202.676765] total ret nonce num = 465, diff1_nonce num = 29760
[ 202.682857] gDiff_nonce_num{21}gNonce_Err{0}
[ 202.687318] gSubmit_nonce_num{21}
[ 202.690782] chain0 asic12 ret nonce_num{8}
[ 202.695064] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 202.700535] dev->temp_out_ctrl{1}
[ 212.721025] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 212.728783] g_FPGA_FIFO_SPACE 4, fifo_space{488}
[ 212.733615] ret_nonce_num = 530, snd_to_fpga_work{82484}
[ 212.739164] total ret nonce num = 500, diff1_nonce num = 32000
[ 212.745361] gDiff_nonce_num{21}gNonce_Err{0}
[ 212.749830] gSubmit_nonce_num{21}
[ 212.753299] chain0 asic13 ret nonce_num{5}
[ 212.757593] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 212.763050] dev->temp_out_ctrl{1}
[ 222.783670] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4}
[ 222.791434] g_FPGA_FIFO_SPACE 4, fifo_space{304}
[ 222.796268] ret_nonce_num = 571, snd_to_fpga_work{89063}
[ 222.801818] total ret nonce num = 541, diff1_nonce num = 34624
[ 222.807925] gDiff_nonce_num{21}gNonce_Err{0}
[ 222.812384] gSubmit_nonce_num{21}
[ 222.815850] chain0 asic14 ret nonce_num{12}
[ 222.820219] dev->net_diff_sh_bit{36}dev->get_blk_num{0}
[ 222.825674] dev->temp_out_ctrl{1}
[ 226.281385] match diff 11 hash2_32[6]{0x001345a0}
[ 226.469309] match diff 11 hash2_32[6]{0x000e04dd}

 

Have more questions? Submit a request

Comments